Panasonic Palmcorder PV-GS500 Operating Instructions Manual page 62

4
According to the procedures displayed on
the screen, continue the setup.
5
After the setup is completed, sign in and
start Windows Messenger.
≥Windows Messenger is activated.
6
Click on [Audio Tuning Wizard...] in the
[Tools] menu to confirm that equipment is
connected correctly.
7
Select [USB Video Device] in the [Camera]
menu.
8
Select [DVC] in the [Microphone] menu.
≥Please refer to the HELP file of Windows
Messenger to understand its operation.
≥During set up, if [Primary video capture
device] selection screen is displayed,
[Panasonic DVC Web Camera] is selected.
ª
Setting up MSN Messenger
When starting MSN Messenger for the first time,
its setup screen is displayed. (However, the
screen is not displayed if MSN Messenger setup
has already been done.) For more details, please
read the corresponding Help file.
In the case of MSN Messenger 7.0
1
Click [Sign In].
2
Type in your Sign-in name and password.
≥If you do not have your Sign-in name and
password, click [Get one here].
3
Please carefully read the displayed
contents and then proceed.
4
After the setup is completed, sign in and
start MSN Messenger.
5
Click on [Audio Tuning Wizard...] in the
[Tools] menu to confirm that equipment is
connected correctly.
62
LSQT0975
With a PC
6
Select the microphone attached to the PC in
the [Microphone] menu.
7
Click [Web Camera Settings...] in the [Tools]
menu.
8
Confirm that the [Panasonic DVC Web
Camera Device] is selected.
In the case of MSN Messenger 7.5
1
Type in your E-mail address and password.
≥If you do not have a password, click [Get a
new account].
2
After setup is completed, sign in and start
MSN Messenger.
3
Click [Audio and Video Setup] in the [Tools]
menu and then click [Next].
4
Set up the speaker settings.
5
Select [DVC] in the microphone setup
screen.
6
Select [USB Video Device] in the Webcam
setup screen and then click [Finish].
≥For other information about MSN Messenger,
please refer to Help.
≥When access is finished, close MSN
Messenger, then turn off the Camcorder.
Finally, disconnect the USB cable.