Remote Control Description; Mode - White-Westinghouse WAS(C,E)09C5CRKW Instruction Manual

Remote control description

1 TEMP :Press the button to
decrease the indoor temperature
setting.
MODE: Each time you push the
2
button, a mode is selected in a
sequence that goes from AUTO,
COOL, DRY, HEAT*, and FAN, as
the following figure indicates:
AUTO COOL DRY HEAT*
* Note: Only for heating models.
SWING: Push this button, the
3
louver would swing up and down
automatically. Push again to stop it.
4 SLEEP: Press this button to go into
the Energy-Saving operation mode.
Press it again to cancel. This
function is only can be used on
COOL, HEAT and AUTO mode
and maintain the most comfortable
temperature for you. While the unit
is running under SLEEP operation
mode, it would be canceled if you
press the other button.
5 RESET: When you press the
recessed RESET button, all current
settings are cancelled and the
control will return to the initial
settings.
AIR DIRECTION: Press this button
6
to change the swing angle of the
louver. The swing angle of the
louver is 6o for each press. When
the louver swing at a certain angle
which would affect the cooling and
heating effect of the air conditioner,
Remote control description
35
AUTO FAN
COOL HIGH
DRY MED
HEAT LOW
1
2
ON/OFF

MODE

FAN
FAN
3
SWING SLEEP TIMER ON
4
TIMER OFF
Restart
5
AIR FLOW
DIRECTION
6
7
it would automatically change the
swing direction . No symbol will
appear in the display area when
press this button. (Not applicable to
units without this function).
7 LED (screen): Press this button to
8
erase the digits that are shown in
the screen of the air conditioner.
9
Press again to activate.
10
TEMP : Press the button to
8
increase the indoor temperature
11
setting.
12
FAN SPEED: This button is used
9
13
for setting Fan Speed in the
14
sequence that goes from AUTO,
LOW, MED to HIGH, then back to
Auto.
AUTO LOW
ON/OFF: Push this button to start
10
the unit operation. Push the button
again to stop the unit operation.
TIMER ON: Press this button to
11
initiate the auto-on time sequence.
Each press will increase the auto-
timed setting in 30 minutes
increments. When the setting time
displays 10:00, each press will
increase the auto-timed setting 60
minutes increments. To cancel the
auto-timed program, simply adjust
the auto-on time to 0:00.
TIMER OFF: Press this button to
12
initiate the auto-off time sequence.
Each press will increase the auto-
timed setting in 30 minutes
increments. When the setting time
displays 10:00, each press will
increase the auto-timed setting 60
minutes increments. To cancel the
auto-timed program, simply adjust
the auto-off time to 0:00.
LOCK: When you press the
13
recessed LOCK button, all current
settings are locked in and the
remote controller does not accept
any operation except that of the
LOCK. Press again to cancel the
LOCK mode.
TURBO*: Push this button to
14
activate/cancel the Turbo function
which enables the unit to reach the
preset temperature in the shortest
time.O n c ooling m ode,t he u nit
MED HIGH
w ill b low s trong co oling air with
super high fan speed. On heating
mode (applicable to the unit
adopts PTC only), the PTC will
bring fast heating operation.
*Only for some models
Remote control description
36