Bosch 700 Series Basic Instructions page 6

Hide thumbs Also See for 700 Series:

OVEN MODEL SELECTION

This operation is normally executed at the manufacturer facilities.

If the display board has to be replaced, the oven model must be

reconfigured. At first power-up, the Double Oven is always

configured as a 30" both multifunction cavities.

MANUAL TEST ACCESS

1. Press CANCEL key.

2. Turn the knob 4 detents CW.

3. Turn the knob 6 detents CCW.

4. Press START key.

5. The writing MANUAL TEST is displayed.

To reconfigure the oven model as a different double:

1. Press [Cooking Mode] key.

2. Turn the knob to select the correct oven model.

N° MOD DISPLAY

30 CONVECT 2

30 THERMAL 2

27 CONVECT 2

27 THERMAL 2

3. Press [Start] key to accept the new selection, the control

sounds a tone.

4. Press [Cooking Mode] key again to quit the oven model menu

and going back to manual test procedure.

5. Press [Cancel] key.

PROCEDURE:

OVEN MODEL

30" DOUBLE OVEN

MULTIFUNCTION/MULTIFUNCTION

30" DOUBLE OVEN

MULTIFUNCTION/THERMAL

27" DOUBLE OVEN

MULTIFUNCTION/MULTIFUNCTION

27" DOUBLE OVEN

MULTIFUNCTION/THERMAL

Table of Contents