Bosch 700 Series Basic Instructions page 14

Hide thumbs Also See for 700 Series:

4. Meat probe. Plug the meat probe in its receptacle, on the left

side in the cavity. In a double oven only the upper cavity can

be used for probe cooking. The probe icon on the display

must be shown whenever the probe is inserted. If it blanks or

flashes a problem in the connection may exist. Only BAKE,

CONVECTION BAKE, CONVECTION ROAST, FAST

PREHEAT BAKE and FAST PREHEAT CONVECTION

BAKE must be available for cooking. When probe cooking is

running or before starting, press [Temperature] key:

a. Once, to edit the probe temperature edit state (probe

icon and temperature flash).

b. Twice, to edit the cavity temperature (temperature

flashes).

When probe cooking is running, the actual probe temperature

is displayed.

5. [Time] key + knob. Press [Time] key, TIMER is displayed.

Press it once again, in the time area 0:00 starts flashing. Turn

the knob 5 detents CW and check that time increments by

one each detent until 0:05 is displayed, then turn 5 detents

CCW and check that time decrements by 1 each detent until

the timer is back to 0:00. Press [Time] key again to display

the clock again.

NOTE: This last five actions allows to check all the devices

which haven't been tested yet during the Manual Test, including

the keyboard and the rotary switch.

Table of Contents