Charging The Battery - Panasonic NV-VZ1PNA Operating Instructions Manual

2 3
1
1

Charging the Battery

Charge the Battery before using it.
1
Attach the Battery.
≥Align the Battery with line
of the arrow while holding it down.
2
Securely connect the AC Power Cord to the AC
Adaptor and an AC mains jack.
≥The [POWER] Lamp
3
Lamp flashes and charging starts.
≥If the [CHARGE] Lamp
the Battery is attached, remove the Battery and then re-
attach it.
∫ ∫ ∫ ∫ ∫ Charging Lamp [CHARGE]
Flashing: During charging
Lit: The Battery can already be used to
operate the Movie Camera but it is not
yet fully charged.
(Approx. 30-minute battery charge)
Off: The Battery is fully charged.
∫ ∫ ∫ ∫ ∫ Removing the Battery
Slide it in the opposite direction of that indicated in step 1
above.
≥Charge the Battery at a room temperature between 10xC and
30xC.
≥When charging, do not connect the DC Input Lead to the AC
Adaptor.
≥During recording or charging, the Battery becomes warm.
However, this is normal.
≥If you charge the Battery when it is not yet discharged, the
3
[CHARGE] Lamp may flash briefly and then go out. This
indicates that the Battery is fully charged. Therefore, this is
not an indication of a malfunction.
2
1
and push it in the direction
2
lights and then the [CHARGE]
3
does not flash even though