Sonyericsson Programming Interface - Sepi; Sonyericsson Interface - Sepi; Usb Pc Cable; Label Printer (Optional) - Sony Ericsson S700i Installation Instruction, Electrical

Hide thumbs Also See for S700i:

Table of Contents

4.5

SonyEricsson programming interface – SEPI

The USB programming interface is delivered with the necessary software and instruction for

installation. The USB programming interface should be connected to an USB-port on the

computer.

4.6

SonyEricsson interface – SEPI

The cable is the interface between the USB programming interface and the phone.

4.7

The A-B Plug-Plug cable is the interface between the computer and the USB interface.

Connect the cable between the USB programming interface and the computer.

4.8

A Zebra printer model 90xi, 90xiII or 4000 deluxe shall be used. Connect the printer with a

standard RS 232 serial printer cable [refer to the Zebra printer manual] to the serial port on

the computer. Read the Zebra installation manual for more information about the installation.

4.9

An RS 232 or USB type infrared adapter may be used. Install according to the manufactures

instructions.

4.10

Any Bluetooth device as headset, other Bluetooth phone or other Bluetooth device can be

used to verify the Bluetooth function in the phone. Set up the connection according to the

chosen equipments manufacture.

1/00021-2/FEA 204 544/89 B



Company Internal

Sony Ericsson Mobile Communications AB

Installation Instruction, Electrical

6(8)

Table of Contents