Setup - ELRO HDVR7-702X User Manual

1． Fill out all the information then submit.
2． Minutes later, you will get a mail from dyndns, which include the primary password for the user you just
register.
3． Then please login http://members.dyndns.org/ with the new user and password, click "domain name
management" to enter into the operating interface, then select "new" under the Dynamic DDNS.
4． Create a domain name you need, then press to apply; now you have registered a host name success.
20 DVR group network
This chapter mainly narrates some networks' setting method for your reference:
1．Applied ADSL，only one DVR need to connect with Internet
1． Make sure the DVR has successfully connected to ADSL modem; the LED is flashing means success.
2． Network type: PPPoE
3． Input media port and web port. Please refer to"Setup instruction"network setup；
4． Type in the PPPoE user name and password；
5． Fill in DNS IP，such as:202.96.128.166 or 10.95.0.3. Users can refer to local computer DNS setup,（in DOS
input ipconfig/all in DOS to query）；
6． Since the public IP will change after restart, please use DDNS function, and mapping the public IP to a fixed
domain name.
7． Save and restart device, it will connect to internet via PPPoE mode automatically, if success, it will get a
dynamic public IP.
8． ping xxx.xxx.xxx.xxx(The public IP of DVR) to check whether the network is ok, and ping xxx.xxx.xxx（the
domain name of DVR）to check whether the DDNS settings is ok.
- 23 -
9． Open IE browser, and type in the domain name of DDNS (if WEB port is not 80, you should add a port,
please refer to IE setup)
10. Please download the IE control, then enter into login interface, the default setting has no password. Press enter
and into the preview interface, and do what you want according to your need.
2. Applied ADSL, many types of equipment should share and connect with internet
1. Need to confirm with internet manufacture, the ADSL you applied should permit multi share of the internet.
2. You should buy a router, currently many small routers of 4 port Hub is in the market; or your ADSL Modem
has router function;
3. Refer to router user manual to ensure equipment connection correct;
4. Start PPPOE function of PPPOE, use router to have ADSL;
5. Suggest stopping router's DHCP function. DVR and the computer all adopt IP. Notice: DVR, computer and
router's IP must in the same subnet, and the sub mask, gateway,
DVR internet setting:
Computer internet setting:
- 24 -