will return to 【File List】 automatically
2. BACKUP
Via USB Storage to backup, connect USB device via USB2.0 port before backup.
Select the recording file by direction keys , and press【Enter】, There will be a "√ " sign if select is ok, and
then press【BACKUP】to begin backup as follow:
Instruction :
1. When USB device space is less than recording file, the system will show "Space no enough".
2. Disconnect USB device directly when backup finished.
3 RECORD MODE
Move the cursor to 【RECORD】 (Icon highlighted when selected) ,and press 【 Enter】 to enter into the setting
interface(As follow showed). use direction keys and cursor to change the options.
CHANNEL : ON: Means the channel enable for recording.
RESOLUTION: There are D1,HD1,CIF three options, D1 means the resolution best ,
corresponding to D1、HD1、CIF resolution.
QUALITY : There are BEST, FINE and NORMAL three option, They are corresponding HIGHEST, HIGH and
NORMAL data stream standard
- 11 -
5.1.3. The definition of buttons and connectors on rear panel
AUDIO OUT
VIDEO IN
2
1
4 5
3
2
AUDIO OUT
Interface
Connection Description
DC12
1
12V DC power input
This interface provides audio signals to external devices
AUDIO OUT
2
such as speakers. While in the audio playback will
be output of this connector.
VIEDO
OUT
3
Connection M
onitor with this device.
VIEDO
IN
4
Connectio
n wired camera(CH1/CH2)
with this device
AUDIO
IN
5
Connection wired camera(CH1/CH2) with this device
485A
6
PTZ function jack
USB
7
For software upgrade
NET
8
RJ-45 network interface, can be connected to cable for
network remote view or control.
9
Power Switch
Power key for unit
AUDIO IN
1
RJ45
6
8
7
2
USB
- 3 6 -