ELRO HDVR7-702X User Manual page 13

5.1.2 The Definition of Bottoms and Connectors on Front Panel
H.264 DIGITAL VIDEO RECORDER
LCD ON/OFF
POWER CH1 CH2 CH3 CH4 REC
Type Name Illuminations
Direction key include: up【
Direction key
four buttons, which can move cursor to setup
OK
Confirm operation
Start/
Start/
Stop Stop button
【 】
key
Control
Speed choice 】fast forward button、【
【
button
Pause key 【‖】pause key
Single image CH1、CH2、CH3、CH4 single image choice
palyback
【 】PLAY recording playback button
MENU/EXIT E nter into main menu under live view, or exit sub menu
Power (red):steady light when system is power on .
CH1/CH2/CH3/CH4 (Red):steady light when video loss for certain channel.
REC(Green):steady light when record is processing.
LINK(Green):steady light when styetem is connected to internet.
HDD(Green):flash when HDD is installed to HDVR system.
CH1 CH2
CH3 CH4
MENU
LINK HDD
】、down【 】、left【 】、 right 【
】fast reverse button
- 35 -
AUDIO: ENABLE: Means enable the audio recording for all channels, DISABLE: Means disable audio recording
REC.MODE
POWER UP: Means DVR start to record when power on.
It is not available to click the manual/stop record in shortcut menu when setting the record mode as power up.
TIME: Recording as the schedule. When chose Time recording, 【Recording period setting】will be show on in
the right. Move cursor there, and press 【Enter】to the interface as below:
CHANNEL: You can select all channels or just single channel
REC. MODE: There are ALARM,GENERAL,MANUAL RECORD three modes, if set for detailed time, please set in
【Recording period setting】 and then press 【 Enter】 . Impress color means no recording during this time. Different colors
】
mean different recording modes: Red means alarm recording, green means normal recording, blue means no recording.
RECORD SIZE: Press 【Enter】 or 【+】/【-】to choose the record size time.
There are 15min, 30min, 45min, 60min four options, that means it will pack as the mode you selected
4 Hard Disk Management.
Move the cursor to 【HDD】（Icon highlighted when selected）,press【Enter】to enter into the setting interface,
and you can use direction keys and cursor to change the options.
HDD STATUS: There are three status available, normal, un-format, No HDD. If HDD can not run normally
（including unformed and no HDD）, there is a 【H】display on video preview interface.
- 12 -