Table of Contents
Advertisement
OVERWRITE: ENABLE: means when HDD space is less than 4G, it will delete the earliest recording file,
deleting can stop until the space is no less than 10G; DISABLE: means when HDD space is less than 500M it will
stop recording, and an prompt will display "please shutdown and replace HDD"
FO RMAT: Move cursor to select device and press【APLLY】 to format
FORMAT Flash Disk: Move cursor there to select device and press【APLLY】 to format
Note: DVR system will restart after HDD formatted, but no restart for U Flash disk format.
5 BASIC SET UP
Move cursor to select "BASIC SETUP" (The big icon means select ok)and press【ENTER】to enter into the
system language setup interface.
Basic setup includes language, date/time, password, display, and video/audio and exit six options.
6 SYSTEM LANGUAGE SETUP
Move cursor to select "system language" (The big icon means select ok)and press【ENTER】to enter into the
system language setup interface.
Multi-language is selectable(10 kinds total)
, press【ENTER】or【+】/【-】to choose.
Rem ark: System will restart after changing language.
7 DATA/TIME SETUP
Move cursor to select "date/time" (The big icon means select ok)and press【ENTER】to enter into the
- 1 3 -
BANDWIDTH: Set the amount of bandwidth in kbps (128k、192k、256k、384k、512k、1024k) that you want to
allocate for traffic that matches internet，this bandwidth depends on the place, normally around 256 or 384 kbps.
FILE SAVE PATH: capture picture and recording video save path.
IE login password and DST settings you can check as DVR setting.
4.4.16 HOST INFO
Click "HOST INFO" to enter into system information interface (see below picture), this interface shows HDD
status, remain record time, firmware version, MAC Address, and all the information is fixed.
Chapter 5 DVR Installation Guideline
5.1 Pr oduct Overview
5.1.1 Pr odu ct Photo
- 3 4 -
- Quick Links:
- Main Feature
Hide quick links:
Advertisement
Table of Contents
