Table of Contents
Advertisement
Bee2 connections
The IR/ sense socket is output for the IR-emitter that sends IR to the device to be operated. In some cases
this socket is also used for sensing purposes. Some BeeLINK2 converters needs to know if the device is
powered up or not.
In some cases this socket is used for other serial communications like RS-232 instead of IR control.
Prog switch is a push button that must be activated to initiate a programming sequence, as described in the
option programming chapters.
Do not use socket is for firmware updating of the controller, and connection to special adapters. If used for
anything else, the controller will be damaged.
LED indicates different operating states:
Red-green flash:
No data has been received since power has been applied
Red flash:
The controller is in option programming mode.
Red:
The controller is active.
Green:
The controller is inactive.
Short off:
When the controller sends data, the LED turns off 1 sec.
w w w . o n e r e m o t e . d k
Page 7
Advertisement
Table of Contents
