6-Relay Modules; Hybrid Modules - ABB SM1000 User Manual

...4 CONFIGURATION

4.7.2 6-Relay Modules

A:- Analog i/p C:- Relay
Relay C1
Relay C2
Relay C3
Relay C4
Relay C5
Relay C6

4.7.3 Hybrid Modules

A:- Analog i/p C:- Hybrid
None, None
Digitial o/p C1 + C2
Digital Outputs C5 and C6
C5 Source
C5 Polarity
C6 Source
C6 Polarity
Digtial outputs C3 + C4
Digtial outputs C5 + C6
64
Alarm State 1.1A, +ve
Totalizer 1.2 Intermediate,
None, Positive
None, Positive
None, Positive
None, Positive
None
Positive
None
Positive
None, None
None, None
The Relay Source is a digital source used to energize/
de-energize the relay.
Note. If the relay is used to provide a totalizer count
pulse, the maximum pulse frequency is 5Hz. Consideration
must also be given to the mechanical life of the relay.
When the polarity is set to Positive, the relay is energized
when the digital source is active (On).
The digital output source is the internal digital source that is
used to activate/de-activate the digital output.
When the polarity is set to positive, the digital output is
energized when the digital source is active (On).
OK