ABB SM1000 User Manual page 55

...4.6.2 Analog Input Configuration
0 to 2000 l/sec
Engineering range
Engineering range
High
Low
Units
8 Character
Short tag
20 Characters
Long tag
•1 If this parameter is changed, a new internal data file for this recording channel is created. All historical data stored internally for this
channel is lost.
2000
0
l/sec
OK
Specify the display range and units of the engineering value
•1
corresponding to the electrical high and low values, within
the limits defined below:
THC/RTD Type
Type B
Type E
Type J
Type K
Type L
Type N
Type R&S
Type T
Pt100
Power 5/2
Power 3/2
SqRoot
Custom
Linearizer 1
Custom
Linearizer 2
Linear
Limits of Engineering Ranges
– for an electrical input range of 4.0 to 20.0 mA,
Example
representing a pressure range of 50 to 250 bar, set the 'Low'
value to 50.0 and the 'High' value to 250.0.
Enter the tag name to be displayed on channel indicators and
•1
used to identify the channel in archive files. (8 characters max.).
Note. Tags with a high percentage of capital letters
and wide characters such as 'W' or 'M' may appear
truncated in some Operator Views. In such cases, use lower
case letters or fewer characters.
Enter the tag name to be displayed on the process view and used
•1
in the archive files (20 characters max.).
4 CONFIGURATION...
°C °F
Min. Max. Min. Max.
–18 1800 0
–100 900 –140
–100 900 –140
–100 1300 –140
–100 900 –140
–200 1300 –325
–18 1700 0
–250 300 –400
–200 600 –325 1100
–999 to +9999
3270
1650
1650
2350
1650
2350
3090
570
53