Inserting Tools; Removing Tools - ALDI WB 12-2 User Manual

GB IRE
Operation
CAUTION!
Risk of injury while drilling!
While drilling, you could inhale dust and wood chips.
− Wear a dust mask.
When drilling, the loud drilling noises could damage your hearing.
Noise may cause hearing loss.
NOTICE!
Risk of damage!
If the vents on the cordless drill are covered or an unsuitable drill bit
and settings are used for different materials, the cordless drill and
the drill bits could be damaged.
− Do not cover the vents. If you cover the vents during operation,
the accumulation of heat may damage the cordless drill.
− Only use the enclosed metal drill bits for metal, wood and plastic.

Inserting tools

1. To clamp in one of the drill bits
quick-action drill chuck
This will open the quick-action drill chuck.
2. Select
• the suitable drill bit and insert it in the quick-action drill chuck.
• the magnetic bit holder and insert it with the hexagonal side forward in the
quick-action drill chuck.
3. Turn the quick-action drill chuck clockwise until tight (see fig. D).
4. Once you have inserted the magnetic bit holder, insert a suitable bit

Removing tools

1. Turn the quick-action drill chuck
2. Take the tool out of the quick-action drill chuck and store it properly in the
storage case 14
20
meister-service@meister-werkzeuge.de
11 or the magnetic bit holder
, turn it counterclockwise (see fig. D).
1
1
.
counterclockwise (see fig. D).
Cordless drill
12 in the
13 .
AFTER SALES SUPPORT
00800 34 99 67 53
GB IRE