Download  Print this page

Wire Connections; Connect Wires - Honeywell RTH5100B Installation Manual

Non-programmable digital thermostat
Hide thumbs


Table of Contents
Installation Guide
Connect wires (typical installation)
1. Match each labeled wire with same letter on terminal.
2. Use a screwdriver to
loosen screw term-
inals, insert wires,
then tighten screws.
3. Push any excess
wire back into the
wall opening.
Labels don't match?
If labels do not match letters
on thermostat, see next page.
Remove metal
jumper if you
have both R
and Rc wires.


Table of Contents

  Related Manuals for Honeywell RTH5100B