Wire Connections; Connect Wires - Honeywell RTH3100C Installation Manual

Connect wires (typical installation)
1. Match each labeled wire
with same letter on terminal.
2. Use a screwdriver to
loosen screw terminals,
insert wires, then tighten
screws.
3. Push any excess wire back
into the wall opening.
Labels don't match?
If labels do not match letters
on thermostat, see next page.
69-1891ES-1-RTH3100C-IG.CS5.indd 11
11
RTH3100C
5/17/2011 11:21:07 AM