Stopping The Machine - Toro 74538 Operator's Manual

1
2
3
4
3
Figure 21
1. Front reference bar
2. Left control lever
3. Rear reference bar
3. To go forward, move the speed control lever to the
desired speed.
4. Slowly push the motion control levers forward
(Figure 22).
Note: The engine will kill if a motion control lever
is moved with the parking brake engaged.
The farther you move the motion control levers in
either direction, the faster the machine will move in
that direction.
To stop, pull the motion control levers back to the
neutral position.
5
4
G015234
4. Right control lever
5. Right control lever in the
neutral lock position
Driving Backward
1. Move the right side motion control lever to the
center, un-locked position.
2. Slowly pull the motion control levers rearward
(Figure 23).

Stopping the Machine

To stop the machine, move the motion control levers to
neutral, move the right side motion control lever into
the neutral lock position, disengage the power take off
(PTO), and turn the ignition key to off.
22
Figure 22
Figure 23