CleaningTheShaver - Panasonic ES-RT97 Operating Instructions Manual

Cleaningtheshaver

Cleaningusingtheself-cleaningrecharger
►Preparingtheself-cleaningrecharger

Remove the shaver and the appliance plug from the self‑cleaning
recharger.
1
1
Placetheself-cleaningrechargeronahard,flat
surface.
• When the self‑cleaning recharger is lifted, or on the soft
surface such as carpets, the lock release lever will not fit in
the recharger properly. In that case, the cleaning liquid unit
cannot be removed.
2
2
Pressthecleaning
liquidunitremoval
button(1)and
removethecleaning
liquidunit(2).
3
3
Washawaytheoldcleaningliquidandbeard
trimmingsandthenrinsethecleaningliquidunit.
• After washing, be sure to attach the cleaning liquid filter.
4
4
Pourtapwater(1)and
detergent(2)intothe
cleaningliquidunit.
• Do not let the water rise
above the maximum water
line. This may cause the
cleaning liquid to spill.

 
5
5
Attachthecleaningliquidunit.
• Immediately wipe up any cleaning liquid
that has been spilt.
Be careful not to drop cleaning liquid
onto leather products or wooden floors
as it may cause discoloration.
6
6
Pressthetopoftheself-
cleaningrechargerdownand
securelyattachuntilitclicks.
Notes
• The water and detergent will mix after cleaning begins, making
cleaning liquid.
• If "AUTO" mode cannot be selected or the STATUS lamp glows
for 5 seconds when the SELECT button is pressed, the cleaning
liquid needs to be replaced. Replace the cleaning liquid.

• When replaced, the cleaning liquid will last for approximately
30 days if used once per day. (This will differ depending on
beard thickness and the ambient temperature.)
• Use the detergent within approximately 6 months after opening
the package. When 6 months have passed, discard the
cleaning liquid, and then pour new water and detergent into the
cleaning liquid unit.
• Replace the water and detergent at the same time.
Otherwise the cleaning function may deteriorate.
• Only use self‑cleaning recharger detergent for Panasonic shavers.
15