Manual Shutter Speed/Aperture Adjustment - Panasonic HDC-SD9PC Operating Instructions Manual

Manual shutter speed/aperture adjustment

Shutter Speed:
Adjust it when recording fast-moving subjects.
Aperture:
Adjust it when the screen is too bright or too dark.
≥ Set the AUTO/MANUAL/FOCUS switch to MANUAL. (l 59)
1
Move the cursor button to select
[ ] (aperture) or [
speed).
2
Make the adjustment.
A Shutter speed:
1/30 to 1/8000
≥ If [AUTO SLOW SHTR] is set to [OFF], the
shutter speed will be set between 1/60 and
1/8000.
≥ If [24pDIGITAL CINEMA] is set to [ON], the
shutter speed will be set between 1/24 and
1/8000. (When [AUTO SLOW SHTR] is set to
[OFF], the range is 1/48 to 1/8000.)
≥ The shutter speed closer to 1/8000 is faster.
B Iris/Gain value:
CLOSE # (F16 to F2.0) # OPEN # (0dB to
18dB)
≥ Value closer to [CLOSE] darken the image.
≥ Value closer to [18dB] brighten the image.
≥ When the iris value is adjusted to brighter than
[OPEN], it changes to the gain value.
≥ Set the AUTO/MANUAL/FOCUS switch to
AUTO to restore to automatic adjustment.
≥ When setting both the shutter speed and the
iris/gain value, set the shutter speed and then
set the iris/gain value.
62
VQT1N45
Manual shutter speed adjustment
] (shutter
≥ Avoid recording under fluorescent light,
≥ If you increase the shutter speed manually, the
≥ You may see vertical lines of light in the
≥ During normal playback, image movement
≥ When recording in an extremely bright place,
Manual iris/gain adjustment
≥ If the gain value is increased, the noise on the
≥ Depending on the zoom magnification, there
mercury light or sodium light because the color
and brightness of the playback image may
change.
noise on the screen may increase.
playback image of a brightly shining subject or
highly reflective subject, but this is not a
malfunction.
may not look smooth.
the screen may change color or flicker. If so
adjust the shutter speed manually to [1/60] or
[1/100].
screen increases.
are iris values that are not displayed.