Panasonic HDC-SD9PC Operating Instructions Manual page 116

High definition video camera
Table of Contents

Advertisement

Problem
This unit cannot be
operated though it is
turned on.
This unit does not
operate normally.
The remote control does
not function.
The remaining time
indication or the elapsed
time indication is not
shown.
Recording does not start
although power is
supplied to this unit and
the SD card is correctly
inserted.
The unit arbitrarily stops
recording.
Color balance of images
is strange when
recording in a place such
as a gymnasium.
Auto focus function does
not work.
116
VQT1N45
≥ The unit cannot be operated if the LCD monitor is not
opened.
≥ Press the RESET button. (l 118) If normal conditions are
not restored yet, remove the battery or AC adaptor, wait
about 1 minute and then reconnect the battery or AC
adaptor. Then about 1 minute later, turn on the power
again. (Conducting the above operation while the SD card
is being accessed may damage the data on the SD card.)
≥ The button-type battery of the remote control may be run
out. Replace it with a new button-type battery. (l 19)
≥ If you set [SETUP] > [DISPLAY] > [OFF], all indications
other than warnings and date are not displayed.
≥ Operate the mode switch to select
≥ No recording is possible while the SD card's write protect
switch is set to LOCK. (l 24)
≥ If there is no more available memory of the SD card, free up
some memory by deleting unnecessary scenes or use a
new SD card. (l 25, 72)
≥ If the SD card cover is open, this unit may not operate
normally. Close the SD card cover.
≥ Use an SD card that can be used for motion picture
recording. (l 24)
≥ If [AGS] is [ON], record in the normal horizontal position or
set [AGS] to [OFF]. (l 35)
≥ In a place with multiple light sources, such as a gymnasium
or a hall, the auto white balance function may not operate
properly. In this case, adjust the white balance setting
manually. (l 61)
≥ Set the AUTO/MANUAL/FOCUS switch to AUTO.
≥ If you are trying to record a scene which is hard to bring into
focus in auto focus mode, use the manual focus mode to
adjust the focus. (l 60, 127)
Check points
.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hdc-sd9pHdc-sd9-8gbHdc-sd9

Table of Contents