Adjusting The Feet; First Use; Transportation Of The Machine; Changing The Illumination Lamp - Beko DCX 71100 W User Manual

Condenser sensor dryer
Table of Contents

Advertisement

1
3
A
Hose connection should be made in a safe
manner. Your drain house will be flooded if
the hose comes out of its housing during
water discharge.
C
Water drain hose should be attached to a
height of maximum 80 cm.
C
Make sure that the water drain hose is not
stepped on and it is not folded between the
drain and the machine.

3.4 Adjusting the feet

In order to ensure that the dryer operates more silently
and vibration-free, it must stand level and balanced on
its feet. Balance the machine by adjusting the feet.
Turn the feet to left or right until the dryer stands level
and firmly.
C
Never unscrew the adjustable feet from
their housings.
Dryer / User Manual
2
4
3.5 Electrical connection
For specific instructions for electrical connection required
during installation (see 1.1.1 Electrical Safety)
3.6 Transportation of the dryer
Unplug the dryer before transporting it.
Drain all water that has remained in the dryer.
If direct water drain connection is made, then remove the
hose connections.
We recommend carrying the dryer in
upright position. If it is not possible
A
to carry the machine in the upright
position, we recommend carrying it
by tilting towards the right side when
looked from the front.

3.7 Changing the illumination lamp

In case an illumination lamp is used in your laundry dryer
To change the Bulb/LED used for illumination of your
tumble dryer, call your Authorized Service.
The lamp(s) used in this appliance is not suitable for
household room illumination. The intended purpose of
this lamp is to assist the user to place laundry in the
tumble dryer in a comfortable way.
EN 15 / 32

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcx 71100 s

Table of Contents