Page 2
4K UHD Network Video Recorder Series Quick Guide Page 1 Features Standalone NVR Supports 4K( UHD ) and 1080p 120 FPS IP cameras Each channel up to 9 Mbps incoming network throughput 4K HDMI 2.0 and VGA 1080p output Compatible with iOS and Android devices Metadata can be embedded into videos Supports Setup Wizard HTML5 streaming multiple browser supported...
4K UHD Network Video Recorder Series Quick Guide Page 2 Product Overview 8Bay Non-RAID NVR Professional 2U 19” Front View 1. HDD LED, green, blinking, HDD activity indicator 2. LAN LED, green, LAN activity indicator 3. ALARM LED, red, blinking, indicator of triggered alarms 4.
Page 4
4K UHD Network Video Recorder Series Quick Guide Page 3 Hard Drives Installation Instructions Professional 2U 19” 8Bay Non-RAID NVR Installation Remove the upper casing and loosen the screws on both sides of the hard drive bracket to remove it. Install hard drives and tighten the hard drive screws as instructed in the image below.
4K UHD Network Video Recorder Series Quick Guide Page 4 Beginning using the NVR You will see the following screen through HDMI or VGA connection once you power on the NVR: The information shown on the top of the screen is described as followed: 0.00 / 1000 (100) Mbps: The left side of the slash is the combined transmission rate of all channels, and the right side your network speed.
Page 6
4K UHD Network Video Recorder Series Quick Guide Page 5 At the upper-left corner of the screen is the NVR controls, which are, from left to right: NVR SETTINGS, FREEZE, ALARM EVENT, PLAYBACK/BACKUP , SCHEDULE, and MANUAL Recording. NVR SETTINGS If you access the NVR SETTINGS for the first time, you will see Setup Wizard on the screen as below, which provides you with quick configurations for the NVR, including language, password, date, time, storage, network, P2P, and camera.
Page 7
4K UHD Network Video Recorder Series Quick Guide Page 6 to export the video to a storage device or send notification email to a pre-determined email address. PLAYBACK/BACKUP Click to enter the following screen for playback and backup. You can expand and collapse the upper timeline by YEAR, MONTH, DAY, HOUR, and MINUTE.
Page 8
4K UHD Network Video Recorder Series Quick Guide Page 7 Controls for the number of split-screens. Click to broadcast your message through a microphone. Click to activate the sequential mode, which will show videos channels in the order you specify. Click to activate a specific DO output.
Page 9
4K UHD Network Video Recorder Series Quick Guide Page 8 To activate continuous recording, make sure the desired channel’s Record Mode in NVR SETTINGS > RECORD > GENERAL is set to Schedule; Schedule Table in NVR SETTINGS > RECORD > SCHEDULE is set to Always;...