Table of Contents
Advertisement
2.
Select your destination drive and folder and click
•
button creates a subfolder under the selected folder.
3.
Enter a new subfolder name and click [OK].
•
A subfolder will be created under the selected folder.
4.
Click [OK].
Notes
•
When you monitor Network Camera or play back recorded images that is
specified to the different folder, specify the same folder by selecting
[Select Camera Database].
•
When having created a folder without checking [Copy existing camera
definitions], Network Camera must be registered newly. Refer to page 33
and page 34 to configure a Network Camera.
Operating Instructions
.
Once you configured Network
Camera, check box appears.
Checking it holds all the camera
definitions (Camera Name, IP
address, Camera Type and etc.)
to the newly created folder.
21
Advertisement
Table of Contents
Troubleshooting
