Table of Contents
Advertisement
Operating Instructions
1.4 User Registration
Without the user registration, the number of Network Cameras that can be
configured are only four, and Network Camera Recorder cannot be used beyond
the limitation of 30 minutes. Operate the user registration entering the registration
code and the password.
1.
Start Network Camera Recorder and select [Help]
•
How to Register window appears.
2.
Click [Browse to Registration Page].
•
User Registration web site appears.
3.
Follow the instructions on the web site, enter each required parameter, and
click [Register].
Notes
•
If User Registration web site does not appear, access the web site below:
http://www.comm-9.com/registration/app/index.php
•
Registration code is shown on registration code stickers.
•
Make a note of the password to the registration code stickers. Password is
required in Step 4, and is also sent by e-mail.
18
[How to Register...].
Advertisement
Table of Contents
Troubleshooting
