Press and hold down button 1
until the value shown is reset.
Lights
Side light and low-beam
headlight
The side lights switch on auto-
matically when the ignition is
switched on.
The side lights place
a strain on the battery.
Do not switch the ignition
on for longer than absolutely
necessary.
The low-beam headlight switches
on automatically when you start
the engine.
When the engine is not
running you can switch on
the lights by switching on the ig-
nition and either switching on the
high-beam headlight or operating
the headlight flasher.
High-beam headlight and
headlight flasher
Press switch 1 forward to
switch on the high-beam
headlight.
Pull switch 1 back to operate
the headlight flasher.
Parking lights
Switching off ignition (
Immediately after switching off
the ignition, push button 1 to
the left and hold it in this po-
sition until the parking lights
come on.
Switch the ignition on and off
again to switch off the parking
lights.
4
33
30).
z