Setting Up Alarm Key (Only Comfortel M-300); Call Forward Unconditional (Cfu); Switching On Cfu; Switching Off Cfu - Auerswald COMfortel M-200 Setup And Quick Manual

Operation
3.
Scroll to Find Name and press the Select soft key.
4.
Select the required name and press the Details soft key.
5.
Scroll to the required telephone number and press the Se-
lect soft key.
6.
Scroll to Add to speed dial and press the Select soft key.
7.
Scroll to the item you require 0 to 9 and press the Add name
soft key.
Setting up alarm key
Requirements
– Contact configured in the internal telephone book
1.
Press the Menu soft key to open the main menu.
2.
Scroll to the Phone Book and press the Select soft key.
3.
Scroll to Add to speed dial and press the Select soft key.
4.
Scroll to the position A and press the Add name soft key.
5.
Select the required name and press the OK soft key.

Call Forward Unconditional (CFU)

Requirements
– Controlling of the PBX via telephone authorisation
assigned in the PBX

Switching on CFU

1.
To switch on the follow me function, press *21*, enter the
destination number, and then press #.
2.
Press
pears in the display and you hear an audio signal to confirm
that you have switched on the function.
3.
Press
Note: You can change the *21* sequence in the DECT server.

Switching off CFU

1.
To switch off the follow me function, press #21#, and then
press
58
(only COMfortel M-300)
to switch on the follow me function. A message ap-
to exit this screen.
.
COMfortel M-200/M-300 - Setup and Quick Guide V03 09/2014