Switching On The Handset; Registering The Handset To The Ip-Dect Server (Auto Subscription); Registering The Handset To The Ip-Dect Server (Manually) - Auerswald COMfortel M-200 Setup And Quick Manual

Switching on the handset

•
To switch on the handset, press the left-hand soft key
The dialog box in which you register the handset to the
IP-DECT server opens (Auto Subscription).
Note: You will find an overview of the user elements and the tele-
phone display icons in the Operation chapter.
Registering the handset to the IP-DECT
server (Auto Subscription)
Requirements
– An IP-DECT server connected to the PBX which is already
configured and ready to receive information
– Charged batteries inserted into the handset
– A switched on handset with a language already selected
– A handset which is within range of the IP-DECT server
– Data for the handset:
AC code (entered in the IP-DECT server under Users >
Username in the Access code field)
User ID (entered in the IP-DECT server under Users >
Username in the Username/Extension field)
– If necessary, knowledge of the IP-DECT server's ARI
1.
Enter the AC code.
2.
Scroll to User ID and enter the User ID.
3.
Press the OK soft key.
The handset is now logged onto the IP-DECT server.
Registering the handset to the IP-DECT
server (manually)
Requirements
– An IP-DECT server connected to the PBX which is already
configured and ready to receive information
– Charged batteries inserted into the handset
COMfortel M-200/M-300 - Setup and Quick Guide V03 09/2014
Commissioning
.
49