Adjustable Pedals; Cruise Control - GMC 2005 Yukon Owner's Manual

Program HomeLink

Adjustable Pedals

(if equipped)
1. Determine which of the three chan-
The buttons used to
adjust the pedals are
located on the driver's
side door panel.
• Press the button
closest to you to
move the pedals closer to your body.
• Press the button farthest from you to
move the pedals away from your
body.
The vehicle must be in Park (P) for this
feature to operate.
See Section 2 of your Owner Manual.
Cruise Control (if equipped)
Cruise control allows you to maintain a
constant speed of 25 mph or more with-
out keeping your foot on the accelerator
pedal.
Setting Cruise Control:
1. Move the cruise control switch to on
.
( )
2. Attain the speed you want to
cruise at.
3. Press in the Set button
the end of the multifunction lever on
the left side of the steering column.
at
( )
4. Take your foot off the accelerator
pedal.
5. The cruise symbol on the instrument
cluster will illuminate.
There are two ways to increase speed
while cruising:
• Use the accelerator pedal to get to a
higher speed. Press
the multifunction lever to set the
cruising speed. Release the accelera-
tor pedal.
• Press the resume/accelerate switch
+
( ) to get to a higher speed, and then
release the switch.
To reduce speed while cruising:
• Press and hold
multifunction lever until you reach the
desired lower speed, and then
release it.
See Section 3 of your Owner Manual.
11
at the end of
at the end of the