Configuration Page; Midi Settings; Sequencer Settings; Play - Arturia microbrute connection User Manual

Configuration Page

MIDI Settings

Receive Channel – this sets the channel that the MicroBrute will receive MIDI data
on. You can choose individual channels or ALL channels.
Transmit Channel - this sets the MIDI channel that the MicroBrute will send MIDI data
on via USB. You can choose any of the 16 MIDI channels.

Sequencer settings

Play

The sequencer can play using two different playing methods;
Note On mode and HOLD mode.
• Note On mode will start the sequencer any time you play a note on the
keyboard.
• Hold mode will start playing the sequencer immediately when the PLAY mode
is set to PLAY with the switch on the front panel.

Seq Retrig

This parameter allows you to choose how the Sequencer will respond to keys being
played.
• Reset - Each new note that is played will restart the pattern from the
beginning.
• Legato – Notes that are played legato, will just transpose the pitch of the
currently playing pattern and not interrupt the playing position of the
sequence. If you play a note in a non-legato fashion, it will start the pattern
from the beginning again.
• None – this mode will not reset the sequence at all. The sequence will
continue playing from the place where it stopped.
5