Camera Sw Mode Screen - Panasonic AJ-D610WBp Operating Instructions Manual

MAIN Menu Screen 2 of 4 (SUB menus)

CAMERA SW MODE screen

The camera's switch modes are set on this screen.
¢| C AME R A SW MOD E {
:
S U P E R V F RM 1
:
F I L T E R I N H ON
:
S HOC K L E S S AWB NORMA L
:
CO L OR B A R SMP T E
:
S . G A I N O F F L / M / H
:
S . I R I S S . / B L K S W I N H
∂ 1 0
:
S . B L K L V L
:
E C U D A T A S A V E O F F
|Note{
When OFF has been selected for
the ECU DATA SAVE item setting,
set the unit's POWER switch to OFF
after setting the POWER switch on
the AJ-EC3 to the OFF position. If its
POWER switch is set to OFF before
the POWER switch on the AJ-EC3 is
set to the OFF position, the adjust-
ments and settings performed when
the AJ-EC3 was operated will be
saved instead.
F
1 S.BLK is a function which enables
the master pedestal to be set lower
than the pedestal level. It is used
when the black figures displayed
on the screen have become lighter
due to mist, etc.
F
2
MASTER PED R PEDESTAL
MASTER DTL G PEDESTAL
MASTER GAMMA B PEDESTAL
SYNCHRO SCAN
R GAIN
B GAIN
The underlining in the variable range column indicates the setting in the preset mode.
USER menu: The USER menu appears when the MENU switch is set to SET.
ENG menu: The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are
held down together.
Variable
Item
range
SUPER V FRM1
FRM2
FILTER INH ON
OFF
SHOCKLESS OFF
NORMAL
AWB
SLOW
FAST
COLOR BAR SMPTE
SNG
S.GAIN OFF S.GAIN
L/M/H
S.IRIS/ S.IRIS
S.BLK SW S.BLK
INH
p10
S.BLK LVL
p20
p30
ECU DATA SAVE ON
OFF
– 126 –
VF
Remarks
display
ENG This selects ON or OFF for SUPER V.
FRM1: Normal mode
FRM2: Residual image reduction
mode
ENG This switches whether the AWB
memory (A and B channels) data is to
be stored for each filter.
ON: The data is stored in the A and B
channel memories (2 memory units)
only regardless of the filter.
OFF: The data is stored for each filter.
(4q2r8 memory units)
ENG This selects ON (NORMAL/SLOW/
FAST) or OFF for shockless AWB.
"Shockless AWB" ensures that a shock
will not result when the A, B or PRST
setting of the WHITE BAL switch is
changed. FAST (high speed),
NORMAL (normal speed) or SLOW
(low speed) can be set as the selection
time. FAST (approx. 0.5 sec),
NORMAL (approx. 1 sec),
SLOW (approx. 3 sec)
ENG This selects the type of color bars.
SMPTE: SMPTE color bars
SNG: SNG (split) color bars
ENG This selects the method used to
release the super gain mode.
S.GAIN: The mode is released by the
super gain switch only.
L/M/H: The mode is released by
changing the L/M/H switch setting.
ENG This allocates the function of the side
panel switch.
S.IRIS: The switch works as a super
iris function.
S.BLK: The switch works as a super
black function.F 1
INH: Both the super iris and super
black functions are inhibited.
ENG This sets the super black level.
ENG ON: When the ECU is detached from
the camera recorder, the set values of
the following items controlled by the
ECU are stored in memory.F
OFF: The set values are not stored in
the memory.
2