Table of Contents
Advertisement
Status Displays Inside the Viewfinder Screen
1
Extender display
This is displayed when the lens extender is being used.
2
Shutter speed/mode display
This displays the shutter speed or shutter mode setting.
OFF (OFF is not displayed.):
The shutter is not used.
1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000:
Shutter speeds (seconds) during standard mode.
1/60.8–1/250 (SYNCHRO SCAN):
Synchro scan mode is selected.
SUPER V:
High vertical resolution mode is selected.
3
Remaining tape length display
This indicates the remaining tape length (minutes) for the VTR during recording.
Remaining tape length display
Remaining tape
Display
F–60
Full to 60 minutes
60–55
60 to 55 minutes
55–50
55 to 50 minutes
50–45
50 to 45 minutes
45–40
45 to 40 minutes
40–35
40 to 35 minutes
35–30
35 to 30 minutes
30–25
30 to 25 minutes
25–20
25 to 20 minutes
20–15
20 to 15 minutes
15–10
15 to 10 minutes
10–5
10 to 5 minutes
5–0
5 to 0 minutes
4
Remaining battery level display
When an Anton Bauer Digital Magnum Series battery is used to supply power to the unit, the
remaining battery level is displayed numerically (%).
|Note{
When a Digital Magnum series battery made by Anton Bauer is used to supply external
power to the unit near the battery end, the remaining battery level display will show the
external voltage, and the unit will be operated by the external power supply.
5
Filter display
This displays the type of filter selected.
6
White balance memory display
This displays the selected white balance automatic adjustment memory.
A: The WHITE BAL switch is set to A.
B: The WHITE BAL switch is set to B.
P: The WHITE BAL switch is set to PRST.
7
Gain value display
This displays the image amplifier gain setting (dB) set by the GAIN switch.
– 58 –
length
The "5–0" display flashes when there is
less than 2 minutes of tape remaining.
Hide quick links:
Advertisement
Table of Contents
