Mount Safety Wall Attachment Strips - Room essentials 249-05-0418 Assembly Instructions Manual

step 11 case assembly - mount safety wall attachment strips
1
94073
x2
wall attachment strip
1. Place the dresser in the desired position against the wall. Mark the locations of
the TWO wall attachment SLOTS at the top of the DRESSER.
2. MEASURE down 1 1/5" from the mark at the top of the case and attach the two
wall STRIPS with washers and screws.
Note - The washers and screws for wall attachment should be purchased from
a hardware store to suit the type of wall.
3. Pass the wall attachment strips through the slots at the top back of the case,
and attach them to the underside of the DRESSER top with the screws and
washers that are included in the PACK.
2
1 1/5"
IMPORTANT.
The screw supplied together with the wall attachment strip
is to be used only for fixing the wall attachment strip to the
furniture.
3
In addition to this, you vill need to choose a screw or
fitting which is suitable for securing the bracket to the
kind of walls you have. If you are unsure about what type
of screw to usee contact your local handware store.
Wall attachment strip are required to be installed.
F
L
09732
09732
H
G
I
19