Error Information - ADJ Vizi Hybrid 16RX User Instructions

Vizi Hybrid 16RX
If any of these warning's appear and you are not certain on
what form of action needs to be taken, please contact ADJ
customer support for more information.
Lamp Startup Fail
This will appear when there is no lamp in place or wires are damaged.
Temperature Sense Error
This will appear when the temperature check board is damaged.
Lamp Too Hot Power Off
This will appear when the detected temperature is higher than 110°C
or 230°F. Check and make sure the unit is properly ventilated. Check
the fans or temperature check board maker sure they are not dam-
aged.
Lamp Too Hot Low Power
This will appear when the detected temperature is higher than 105°C
or 221°F. The unit will then run on a lower power level.
Lamp On Over 700 Hour
This will appear when the lamp has been on over 700 hours. When
this appears you need to turn the lamp off.
Memory Initial Fail
This will appear when the memory IC is damaged.
Temperature Sense Error
This will appear when the temperature check board is damaged.
CPU-8 Error, CPU-C Error, CPU-D Error
This will appear when the PC board or wires are damaged.
ADJ Products, LLC - www.adj.com - Vizi Hybrid 16RX Instruction Manual Page 36

Error Information

Vizi Hybrid 16RX
Random Error Messages
Pan Reset Error, Pan Encode Error, Tilt Reset Error, Tilt Encode Error,
Shutter Reset Fail, Dimmer Reset Fail, Color Reset Fail, Cyan Reset
Fail, Magenta Fail, Yellow Reset Fail, Gobo1 Reset Fail, R-Gobo1
Reset Fail, Gobo2 Reset Fail, Iris Reset Fail, Effect Reset Fail,
R-Effect Reset Fail, Frost Reset Fail, Flat Reset Fail, Focus Reset Fail,
Zoom Reset Fail.
These may appear when turning on or reseting the unit. For some
parts such as the PC Board are damaged. Please contact ADJ cus-
tomer support.
ADJ Products, LLC - www.adj.com - Vizi Hybrid 16RX Instruction Manual Page 37
Error Information