D-Link AirPro DWL-6000AP Manual page 17

Networking Basics
Checking the IP Address in Windows XP/2000
Type ipconfig /renew at the prompt to get a new IP Address. Press Enter. The new IP
Address is shown below.
(Windows 98/ME users: go to Start > Run. Type Command. Type winipcfg at the prompt.
The Windows IP Configuration menu wil come up. Click Release, then Renew to obtain a
new IP Address.)
Assigning a Static IP Address in Windows XP/2000
Note: Residential Gateways/Broadband Routers will automatically assign IP Ad-
dresses to the computers on the network, using DHCP (Dynamic Host Configura-
tion Protocol) technology. If you are using a DHCP-capable Gateway/Router you
will not need to assign Static IP Addresses.
If you are not using a DHCP capable Gateway/Router, or you need to assign a Static IP
Address, please follow these instructions:
Go to Start
Double-click on
Control Panel
32
Networking Basics
Assigning a Static IP Address in Windows XP/2000
Double-click on
Network
Connections
Right-click on Local Area
Connections
Double-click on
Properties
33