Loading Photos In The Input Tray - Epson FF-640 User Manual

Hide thumbs Also See for FF-640:
Table of Contents

Advertisement

scanning and use the included microfiber cloth to clean the scanner rollers after every 500 scans, or
even before each scanning session. See the link below for instructions on cleaning the rollers.
Parent topic:
Related tasks
Cleaning Inside Your Scanner

Loading Photos in the Input Tray

Loading Photos in the Input Tray
You can load up to 30 photos that meet the scanner's photo specifications in the input tray.
Note: Loading thick photos reduces the maximum number of photos that can be loaded in a single
batch.
Before loading multiple photos, prepare the photos as described in the link below.
Caution: Do not load fragile or irreplaceable photos, or valuable original documents or artwork, directly
into the input tray. This may wrinkle or damage the original. Load these originals one at a time using a
carrier sheet.
Follow these guidelines when loading photos:
• Do not mix photos and documents.
• Scan photos of the same size in a batch.
• Do not add more photos during scanning.
• The total thickness of the photo stack must be less than 0.3 inch (8 mm) including any curve in the
photos.
• Scan photos larger than 5 × 7 inches (127 × 178 mm) one at a time.
Caution: Do not scan Polaroid photos. Polaroid photos are too thick, and can damage the photo or your
scanner.
Loading Originals
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents