Monitor Problems - Lenovo ThinkCentre M32 Hardware Maintenance Manual

Hide thumbs Also See for ThinkCentre M32:
Table of Contents

Advertisement

Action: Erratic movement of the mouse pointer is generally caused by a buildup of dirt, oils, and other
contaminants on the ball inside the mouse. Clean the mouse. See "Optical mouse" on page 37 for
instructions.
The wireless keyboard does not work
Symptom: The wireless keyboard does not work.
Action: If the Transceiver Communications LED is on and the wireless Keyboard does not work, restart your
computer. If restarting your computer does not solve the problem, verify that the following conditions are met:
• The batteries are properly installed.
• The batteries still retain their current.
• The wireless Keyboard is located less than ten meters away from the transceiver.
• The transceiver is fully installed.
Action: If the Transceiver Communications LED is not on, reconnect the transceiver and the keyboard.

Monitor problems

Note: Many monitors have status-indicator lights and built-in controls for adjusting brightness, contrast,
width, height, and other picture adjustments. However, the controls vary from monitor type to monitor type.
For information about the status lights and using the controls, refer to the documentation that comes
with your monitor.
Select your symptom from the following list:
"Wrong characters appear on the screen" on page 38
"The monitor works when you turn on the computer, but goes blank after some period of computer
inactivity" on page 38
• "The monitor works when you turn on the computer, but goes blank when you start some application
programs" on page 39
"The image appears to be flickering" on page 39
"The image is discolored" on page 39
Wrong characters appear on the screen
Symptom: Wrong characters appear on the screen.
Action: Have the computer serviced. For details, see "Lenovo Support Web site" on page 29.
The monitor works when you turn on the computer, but goes blank after some period
of computer inactivity
Symptom: The monitor works when you turn on the computer, but goes blank after some period of computer
inactivity.
Action: The computer is probably set for energy savings with the power-management feature. If the
power-management feature is enabled, disabling it or changing the settings might solve the problem.
If you need technical assistance, see "Lenovo Support Web site" on page 29.
38
ThinkCentre M32 Hardware Maintenance Manual

Advertisement

Table of Contents
loading

Table of Contents