Panasonic hc-v180 Operating Instructions Manual page 96

2
Connect the AC adaptor and a sufficiently charged battery to this unit.
≥ If the AC adaptor is not connected to this unit, the USB HDD cannot be used.
3
Turn on this unit, and press the recording/playback button to switch this unit
to the Playback Mode.
4
Connect this unit to the USB HDD with the USB Connection Cable
(commercially-available).
≥ Use a USB Connection Cable (commercially-available) compatible with the USB terminals of this unit and
the USB HDD. Connect the micro A end of the USB Connection Cable to the USB terminal of this unit.
For information on the USB terminal of the USB HDD, refer to the operating instructions of the USB HDD.
≥ It may take several minutes until the connection is completed.
5
Touch the desired item.
[Simple copy]:
[Copy selected files]:
[Playback HDD]:
[Safe Removal]:
≥ Following can be performed by connecting the USB HDD with the scenes and still pictures copied
from this unit to other devices.
j Save on a PC or rewrite on USB HDD using HD Writer LE 3.0
When the USB HDD is connected to other devices such as Blu-ray disc recorder, a message
prompting to format the USB HDD may display. All the scenes and still pictures recorded on the
USB HDD will be erased if formatted. Do not format as important data will get erased and it will
be impossible to restore.
≥ When using an Eye-Fi card (commercially-available), set [Eye-Fi TRANSFER] to [OFF].
When the item is set to [ON], even if you connect the USB HDD to this unit, it will not recognise
the USB HDD.
∫ Points to check before copying
≥ When using a USB HDD for the first time, or using a USB HDD that has been used with
other devices, first run [FORMAT MEDIA].
≥ Before copying, go to [MEDIA STATUS] to check the amount of free space on the USB HDD.
≥ In the following cases, copying may take longer:
j There are lots of scenes
j The temperature of this unit is high
≥ If you copy protected scenes or still pictures, the protection setting of the copied scenes or still
pictures are cancelled.
≥ The order in which the scenes were copied cannot be changed.
Before you delete the data on the media after copying is complete, be sure to play back
the USB HDD to check that they have been copied to correctly.
Copies all scenes and still pictures recorded with this unit that have
not been copied yet.
Allows you to select desired scenes/still pictures, and then copy.
(l 98)
Plays back scenes and still pictures stored in a USB HDD on this
unit. (l 99)
Allows you to safely remove this unit and a USB HDD.
- 96 -
(l 97)
(l
(l
99)
104)