ViewSonic Pro8400 Series VS13647 Service Manual page 24

Step
15
16
P2535-7300-0A *4
17
ViewSonic Corporation
Figure
J1635-3660-0A *2
P2535-7300-0A
21
Description
Loosen the two screws and
remove the lamp module from
optical engine.
Note: Those screws are
included in the Lamp module.
1. Loosen the two screws on
the OE Fan.
2. Remove the Fan.
3. Loosen the four screws on
DMD Board.
4. Remove the heat sink and
DMD Board.
Loosen one screw to remove
the metal sheet.
Confidential - Do Not Copy
Pro8400