Replacement Bulbs; Windshield Wiper Blade Replacement - Chevrolet 2008 Avalanche Owner's Manual

Hide thumbs Also See for 2008 Avalanche:
Table of Contents

Advertisement

3. Pull the old bulb from the bulb socket, keeping the
bulb straight as you pull it out.
4. Install the new bulb.
5. Reverse Steps 1 through 3 to reinstall the bulb
socket.

Replacement Bulbs

Exterior Lamp
Back-up Lamp
License Plate Lamp
Rear Turn Signal Lamp, Taillamp,
and Stoplamp
Sidemarker Lamp
For replacement bulbs not listed here, contact your
dealer/retailer.
Windshield Wiper Blade
Replacement
Windshield wiper blades should be inspected for wear
or cracking. See Scheduled Maintenance on page 6-4.
Replacement blades come in different types and
are removed in different ways. To replace the wiper
blade assembly, do the following:
1. Pull the windshield wiper arm connector away from
Bulb Number
7441
168
3057
194
2. Squeeze the grooved areas on each side of the
the windshield.
blade, and rotate the blade assembly away from
the arm connector.
5-55

Advertisement

Table of Contents
loading

Table of Contents