Mackie DL1608 Quick Start Quide page 29

We've already discussed
"Disconnected" in the Wireless
setup, but why would you ever work
offline? Simply put, you could
create presets, snapshots and
shows while en route to a gig or
show off the awesomeness of
your new mixer to friends without
regard to the local surroundings.
Tap Tools (again) to return you to
the previous view.
Navigation Bar: Presets
Tap the Presets button to display
a popover similar to what may be
seen in Figure R. Here you may
select from a list of factory presets
for the current channel and each
DSP type, as well as save and recall
user presets. As seen in Figure R,
the Presets button illuminates green
when engaged. Tap Presets (again)
to return you to the previous view.
Navigation Bar
Navigation Bar: Snapshots
Finally, residing on the far
right of the Navigation Bar is
the Snapshots button.
Tap Snapshots to display a
popover similar to what may be
seen in Figure S. This is where you
load and save shows and snapshots
and also configure channel safes.
As seen in Figure S, the Snapshots
button illuminates green when
engaged. Snapshot 0 resets the
DL1608 to its default state. Tap
Snapshots (again) to return you
to the previous view.
Notice that on all of these images
that the Navigation Bar is still
presented, regardless of what view
or popover may dominate the iPad.
All features of the Navigation Bar
are discussed at greater length in
the Reference Guide.
Figure R – Presets
Figure S – Snapshots
29