Universal Media Bay - HP ProLiant DL380 Gen9 Maintenance And Service Manual

Remove the drive cage.
7.
To replace the component, reverse the removal procedure.

Universal media bay

To remove the component:
Power down the server (on page 27).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 27).
o
Remove the server from the rack (on page 28).
o
Remove the access panel
4.
Remove all hot-plug hard drives
5.
Remove the fan cage
6.
Disconnect all cables from the universal media bay.
7.
("Access panel" on page 32).
("Hot-plug drive" on page 37).
("Fan cage" on page 43).
Removal and replacement procedures 48