Control And Connection Panel - Montarbo MT180A Instruction Manual

Control and connection panel

MIC.
LINE 1
LINE 2
MIXED LINE OUT
Montarbo
PROCESSOR CONTROLLED POWERED MONITOR
MADE IN ITALY
9
1 Microphone balanced input (-40dB/2kΩ) fitted with
a Neutrik Combo socket allowing use of either XLR or
®
Jack plugs.
See 'connectors' and 'connections' at pages 17 and
18.
2 Microphone input level control.
3 Peak led indicator. The PEAK indicator is of great
help to get an idea of the output level:
- if it never blinks, this means that the working condition
is still below the power limits of the system.
- occasional blinking of this LED indicates that the
working condition is near to the maximum level, yet
the musician's experienced ear still continues to be
the best judge of the signal quality.
4 Two independent, mixable, line inputs (-10dB/22kΩ).
See 'connectors' and 'connections' at pages 17 and
18.
The trademark Neutrik Combo ® is property of Neutrik.
1
0 -40 dB
PEAK
0 dB
-10 dB
4
EQ.
POWER
I
8
0
processor controlled active system
MIC.
LINE 1
LINE 2
MIXED LINE OUT
Montarbo
PROCESSOR CONTROLLED POWERED MONITOR
5 Level control for the Line inputs 1 and 2.
6 Equalization control. The EQ control allows to
change the response curve of the system depending
on the requirements of each different application.
This enables optimizing the MT180A's working
condition for each specific requirement whether it is
used for example in a conference hall, on stage for
monitoring and many other situations.
See examples at pages 11 and 12.
7 Mixed line-level output. It can feed another
MT180A, your personal DAT recorder, a camcorder,
a further mixing console....
See 'connectors' and 'connections' at pages 17 and
18.
8 Power 'on/off' switch.
9 Power supply cable.
MT180A
2
0 -40 dB
3
PEAK
0 dB
5
-10 dB
6
EQ.
7
10
ENGLISH