Lesson 9: Setting Up A Print Job - HunterLab EasyMatch QC User Manual

Lesson 9: Setting Up a Print Job

You may choose to have the data displayed on your screen print in a specific fashion. Suppose you wish
to configure a print job containing two pages of data, the first displaying the Color Data Table, 2D Color
Plot, and Spectral Plot, and the second showing the Spectral Data Table. You would also like to show a
header and footer on each page. Complete the steps below to configure and use the print job.
1. Access the properties page for your default printer. This is done by clicking the Start button and
choosing Printers and Faxes. Right-click on your default printer and choose Properties. Consult
Windows Help for more information.
2. For the paper size and orientation for your printer, choose Letter (8 ½ x 11") and Portrait for use in
this example. In the future, you may use any paper size and orientation you desire. Accept these
settings and exit the printer properties pages.
3. In EasyMatch QC, choose File/Configure Company Logo. The Configure Company Logo screen
appears.
4. Use the "..." (browse) button to locate your company logo file. This file must be in bitmap (.BMP)
format. Once you select the file, a preview will be shown so you can make sure you chose the
proper file.
5. Click OK to exit the Configure Company Logo screen.
6. Choose Header/Footer Setup from the File menu. The Header/Footer Setup screen appears.
2-36
EasyMatch QC User's Manual Version 2.1
Lessons