Philips BDL4640E Service Manual page 15

UP button ( )
To move the highlight bar up to adjust the selected item while the OSD menu is on, or to activate the
OSD menu when the OSD menu is off.
DOWN button ( )
To move the highlight bar down to adjust the selected item while the OSD menu is on, or to activate
the OSD menu when the OSD menu is off.
EXIT button
To return to previous menu while the OSD menu is on or to activate the OSD menu when the OSD
menu is off.
Remote control sensor and Power indicator
To receive the IR signal from the remote control. The indicator would show green when the LCD
monitor is active and would turn red when the LCD is POWER OFF. While in the case of the system is
in power save mode, it would show both green and red. When SCHEDULE is enabled, it would blink
green and glow red. If the indicator blinks red, it tells that a failure is detected.
Main Power Switch
To turn the main power on/off.
Combination Key
Function
Enter Factory Mode
Enter Debug Mode
Enter Factory Reset
Lock Front button
Reload Color Temperature
MENU
Philips BDL4640E 14