Using The Car Camcorder; Automatic Record - HP u818x User Manual

Table of Contents

3 Using the Car Camcorder

Start the car engine, wait a few seconds to charge the camcorder, and then screen

will light up and the camcorder will automatically power on and start recording.

Recording will automatically stop when the engine is switched off.

Note:

1. Some vehicle power supply would not turn on / off automatically with the car engine start, if the camcorder

cannot automatically power on/off with the car engine, please manually connect the power supply with the

vehicle power, and then power on, or manually power off the camcorder and then release the connector with the

car power supply.

2. It can be configured to save a video file for every 30 seconds, 1 or 3 minutes of recording.

3. All the videos and photos are saved in the memory card, if memory card is full, loop recording will generally

overwrite the oldest video file.

4. The camcorder is built-in super capacitor. After start the car engine, please wait a few seconds for charging the

camcorder, and then the camcorder will automatically power on and start recording.

Table of Contents

Table of Contents