1. Neutral position
2.
Slightly tilt the outboard motor up, and
then slowly tilt the outboard motor down
while pulling the tilt support bar up.
1
1. Tilt support bar
Cruising in other conditions
Cruising in salt water
After operating in salt water, flush the cooling
water passages with fresh water to prevent
them from becoming clogged. Also rinse the
outside of the outboard motor with fresh wa-
ter.
Cruising in muddy, turbid, or acidic water
Powertec strongly recommends that you use
the optional chromium-plated water pump kit
(see page 17) if you use the outboard motor in
acidic water or water with a lot of sediment in
it, such as muddy or turbid (cloudy) water. Af-
ter operating in such water, flush the cooling
1
passages with fresh water to prevent corro-
sion. Also rinse the outside of the outboard
motor with fresh water.
Operation
58