Table of Contents
Advertisement
Finding the controls
Main unit
Liquid crystal display
1
The display turns off after about 2 minutes
of inactivity.
To turn on the display, press
Speed Dialer button
2
Volume/Change/Redial/Phonebook key
3
To adjust the volume.
To change Hiragana into Kanji.
To redial the phone numbers in
the redial list. The last 10 phone
numbers dialed are stored in
memory.
To use the phonebook.
To store a parameter.
Call/Fax List button starts a search in
4
— the Number Display (Caller ID) log.
— the fax list stored in memory.
Call/Fax List indicator lights when
— a call was missed.(For Number Display
service users.)
— a fax was stored in memory.
Auto Answer button & indicator
5
—light on: answering device activated.
—light off: used as a regular telephone.
2 2
1
2
11
12
(Stop).
3
4
13
14 15
Playback button plays back recorded
6
messages.
Record button records a telephone
conversation.
When an SD Memory Card is available, it
is recorded in the SD Memory Card.
Intercom button
7
Power indicator
8
SD Memory Card cover
9
SD indicator
10
Multi-operation buttons refer to the function
11
displayed on the display panel.
Fax button starts faxing.
12
Copy button starts copying.
13
Stop button
14
Tone button switches to tone dialing.
15
Night mode button
Sharp button
16
Key lock button can lock the main unit so
that no calls or settings can be made. To
turn key lock on, press this button for about
3 seconds until a single beep is heard.
"
To turn key lock off, press this button for
about 3 seconds.
Monitor button
17
Hold button
18
5
6
16
17
18
" is displayed.
7
8
9
10
Advertisement
Table of Contents
