Jam Recovery; Energy Star - Panasonic KX-PS8000 Operating Instructions Manual

Basic Operations
86

Jam Recovery

After clearing a media jam in the printer:
If Jam Recovery is set to On, printing resumes from the same page at which the jam
occurred by pressing the START COLOR/ENTER button. If it is set to Off, printing
does not resume.
When Jam Recovery is set to On, the printing speed is slower.
For a jam in the ADF, the setting has no effect.

Energy Star

To conserve energy and operating cost, this scanner is provided with a
programmable power save feature. Scanner is factory set with the power save
feature turned on.
If Energy Star is set to On, the scanner enters the Energy Star mode when it is idle
for approximately 5 minutes. To reactivate the scanner, scan a document.
The Energy Star setting will remain effective even if the scanner is turned off.
Note:
BWhen the printer is in the Energy Star mode [ÒPRT is ready (sleep)Ó is displayed
on the scanner LCD.] , press any button on the scanner panel to release the
Energy Star mode. The START COLOR/ENTER button and START B/W
button have no effect until the printer is ready. However, the menu settings can
be changed.
Menu Default
If the START COLOR/ENTER button is pressed when Set is selected for Menu
Default, all current menu settings will remain effective even if the scanner is turned
off. If Reset is selected, all menu settings except the Energy Star setting will return to
the factory default settings.