Advertisement
4. Web configuration access
The ICA-M220 and ICA-M220W camera provides GUI (Web based, Graphical User
Interface) for management and administration.
Step 1 Computer Network Setup
Set your computer's IP address to 192.168.0.x, where x is an integer between 1 to
254 (except 20 where is being used for the camera by default). If you don't know
how to do this, please ask your network administrator, or refer to instructions on
chapter 2.3 of user manual (in supplied CD disk)
Step 2 Login Prompt
Use web browser (Internet explorer 5.5 or above) to connect to 192.168.0.20
(type this address in the address bar of web browser) You'll be prompted to input
user name and password: admin / admin.
Step 3 Activate Installation
After logged on, you could see the following messages appear at the top of
Internet Explorer
Advertisement
