Table of Contents
Advertisement
Making and Answering Calls
Making a voice call manually
1
Press
MONITOR
or lift the handset.
Display:
2
Dial the telephone number.
Example:
If you misdial, hang up and dial again.
3
When the other party answers, talk using the
handset.
4
When finished, hang up the handset.
To redial the last number
1. Press
MONITOR
or lift the handset.
2. Press
REDIAL/PAUSE
If the line is busy when using the
button, the unit will automatically redial the number
up to 14 times.
While waiting for redial, the following will be
displayed.
Answering a voice call
1
When the unit rings, lift the handset.
2
When finished, hang up the handset.
Caller ID capacity (KX-FT34 only)
This unit is compatible with a Caller ID service
offered by your local telephone company. To use
this feature, you must subscribe to a Caller ID
service.
Caller ID allows you to view the name or telephone
number of the caller before you answer the phone.
The calling party information (name has priority) will
be displayed after the first ring.
By using Caller ID, you have the option of whether
or not to answer the call depending on the caller.
– 24 –
TEL=
TEL=2345678
.
MONITOR
WAITING REDIAL
Handset
HANDSET MUTE
REDIAL/PAUSE
Muting your voice to the other party
1. Press
HANDSET MUTE
conversation with the handset.
Display:
The other party cannot hear you, but you
can hear them.
2. To resume the conversation, press
HANDSET MUTE
Handset
HANDSET MUTE
The unit also keeps the caller's information and
prints a list automatically after every 20 calls.
To set this feature, see page 66.
To print out the caller list manually, see page 65.
When a second call is received by call waiting
service, the Caller ID information will not be
displayed or stored in the caller list.
Important:
When you subscribe to a Caller ID service, set the
ring count setting to 2 or more rings (FAX mode ring
count – p. 41, TEL/FAX mode ring count – p. 44).
Dial keypad
MONITOR
during a telephone
<MUTE>
.
Advertisement
Table of Contents
